Can sealing machine is used to seal cans. Sometimes the environment is acidic and the percentage of parts rusting is high and sealing will be needed. We talk about the specifications of these machines and the components used in them.
Technical specifications of the can sealing machine
The chassis used for the can capping machine is made of 304 stainless steel material, which does not lose its use in acidic environments and has an acceptable structure. This machine has a 900-rpm Motogen engine that works as 2.2 kW, and an electrical panel has been used for it, which will be equipped with a can counter.
A timer is used in the device, which gives the necessary command to the pneumatic jacks, and this command is measured based on the position of the jacks. The production capacity of this machine in one work shift is 8 hours and one of the famous models of can capping machine can cover 6 thousand cans.
The parts of the device that have a high percentage of rust need stainless steel 304 material, and also parts that have less wear and corrosion should be used, and the alloy steels used should also be hardened.
One of the famous models of the can capping machine starts from the minimum size of 0.5 kg and covers up to 17 kg. The weight of the machine is 800 kg and it is used for cans of pickled cucumbers, olives, paste, cheese, etc.
Components of the can capping machine
Since we promised to tell the specifications of the can capping machine in detail, in this section we will talk about the parts that are used for this machine.
Head or chuck
The head or chuck is a functional part in the can capping machine, which is used to protect the pressures of the primary and secondary stages of the reel. In any case, a series of main and side pressures are needed to close the cans, and if the manas piece is not used in this context, we will see damage to the cans.
The reels are executed in two stages and it is necessary to use a protector or a head so that the original form of the cans is not lost. This device also works with the help of one head, but in some cases, in larger production volume, 2 to 4 heads are needed to better protect the can.
This part must be of high quality and strong in terms of execution, otherwise we will see many problems for the can.
reel
Another important component for the can capping machine is the pulley. For each can capping machine, at least two pulleys are needed so that they control and manage the first and second operation processes. If there is a need to increase the capping speed, a device with at least two pulleys can be used.
The profile that is used for the first spools leads to a better quality of the lid, in fact, these profiles should be placed in the right section compared to the head.
If the design of the pulleys is unprincipled, it will cause problems, and finally the second pulley cannot perform the sealing operation. In simpler language, if the design of the first pulley is non-standard, even if the second pulley is designed correctly, the operation will still be done incorrectly. take
If the design of the pulleys is unprincipled, it will cause problems, and finally the second pulley cannot perform the sealing operation. In simpler language, if the design of the first pulley is non-standard, even if the second pulley is designed correctly, the operation will still be done incorrectly. take
Electromotor of the device
The can capping machine needs a device or part to rotate the disc well, and this part is the electric motor.
Electric motors are responsible for rotating the disk in a standard way. Spinning the disc and spinning the reel are two separate issues but in the same direction.
Be careful that electric motors can convert electrical power into mechanical power. The body material of these devices is also different. Usually, some electric motors are made of aluminum and others are made of cast iron.
A series of other parts are also used for the can sealing machine, which are very important. For example, the body of the device, which is a kind of container that will contain different parts of the device.
On the other hand, there is a vacuum chamber in which negative pressure is applied and empty oxygen is also used. The act of sealing in this field is based on higher sensitivity.
On the other hand, there is a special part for ejecting the can lid, which works with rod ejectors. This part is placed exactly in the middle of the head, and its movement is up-down or vertical. This piece causes the lid of the can to come out.
The lid opener is another part that is used for the can lid machine. This device works automatically and includes a chamber that performs the lid opening so that the can lid is placed in its correct position.
Types of can sealing machines
In terms of the degree of automation, the can capping machine is divided into three manual or pedal styles, semi-automatic and fully automatic.
The best-selling can capping machine is fully automatic. In this device, no operator will be needed to perform the capping, and the filled cans are placed on special transport tapes, and finally, a mardon is used to follow the direction of the machine correctly. .
Mardons are the tapes that work in a spiral and are made of Teflon. Of course, sometimes they are made of rice. When the cans enter the machine, each can is placed on the conveyor belt by a lever.
Mardons are the tapes that work in a spiral and are made of Teflon. Of course, sometimes they are made of rice. When the cans enter the machine, each can is placed on the conveyor belt by a lever.
In this device, an operator is required to press the button. This device can be used even by non-professionals and no specialized course is required to work with it.
Finally, there is a manual can capping machine that must be operated by a professional operator and the cans are placed in the machine and the capping pedal is pressed.
These devices are suitable for small and limited production lines and the shutters work as pedals. The price of the can capping machine is classified according to the model and style it has, and usually the automatic can capping machine is more expensive.
To get more information, be in touch with the engineering consultants of the Pedemar machine site